Bags and Accessories

How to Clean Leather Gloves and Small Leather Accessories

Learn how to clean leather gloves, including motorbike and riding gloves, by hand: what soap to use, how to dry them, and how to condition them afterwards.

On this page
  1. Check the care label and glove type first
  2. How to hand wash leather gloves
  3. Drying and reshaping
  4. Conditioning after cleaning
  5. Cleaning motorbike and riding gloves
  6. Cleaning white or light leather gloves
  7. Household products: what to use and what to avoid
  8. Can you machine wash leather gloves?
  9. Smelly gloves
  10. Storing gloves
  11. Cleaning other small leather accessories
  12. Quick reference

Check the care label and glove type first

Before you wet anything, read the care label inside the glove. Manufacturers differ, and a label that says “dry clean only” or “do not wash” should be respected. Then work out what the glove is made of, because that decides the method:

  • Smooth leather gloves (dress, driving, work): clean by hand, gently, with very little water.
  • Mixed leather and textile gloves (many riding, cycling and winter gloves): treat them as leather. Moisture can stiffen or shrink the hide even if the rest is fabric.
  • Suede or nubuck gloves: these mark easily with water and usually need a suede brush and a suede-specific cleaner rather than the method below. Our suede cleaner kit guide covers the options.
  • Textile-only gloves: these tolerate more thorough washing and are outside the scope of this guide, though the label still applies.
  • Waterproof-membrane and heated gloves: follow the maker’s instructions closely. Heated gloves need their batteries removed before any cleaning.

If you are unsure, test any product on a hidden spot, such as the inside of the cuff, before using it on the whole glove.

How to hand wash leather gloves

A common approach, used in care instructions from several glove and motorcycle clothing makers, is the “wear-and-wash” method. Washing the gloves while they are on your hands keeps the leather stretched to its normal shape, so it is less likely to shrink as it dries.

  1. Brush off dry dirt first with a soft cloth or soft brush, so you are not rubbing grit into the leather.
  2. Prepare a mild solution. Dissolve a small amount of leather cleaner or a mild, gentle soap in lukewarm water. Avoid hot water.
  3. Put the gloves on and work the soapy water over the surface with your other hand, much as you would wash your hands. Use a damp cloth or sponge rather than soaking them.
  4. Go gently on stains and sweat marks. Do not scrub hard, pull or wring.
  5. Rinse with a cloth dampened in clean water, or briefly under cool running water, until the soap is gone. Press your hands together to squeeze out water.
  6. Take them off and pull them back into shape, smoothing the fingers.

Some makers instead suggest placing the gloves in a basin of cleaner and water and moving them around gently. Either way, the aim is the same: minimal water, minimal rubbing, no wringing.

Drying and reshaping

Heat is the main thing that damages leather at this stage.

  • Press the gloves between clean towels to remove excess water. Do not rub.
  • Lay them flat, or hang them, in a well-ventilated room at normal room temperature.
  • Keep them away from radiators, hairdryers, heaters and direct sun. Fast drying can leave leather stiff and brittle.
  • Do not put damp leather gloves on top of other clothes, as dyed leather can transfer colour when wet.
  • When the gloves are about half dry, some makers suggest putting them on briefly and making a fist to restore their shape.
  • Allow plenty of time. Riding gloves can take a day or two.

Never tumble dry leather gloves unless the manufacturer specifically says a particular model can be.

Conditioning after cleaning

Washing removes some of the leather’s natural oils, so conditioning once the gloves are fully dry helps keep them soft and less prone to cracking.

  • Use a conditioner made for leather, ideally one the glove maker recommends.
  • Apply a thin, even coat with a soft cloth. A thick layer tends to sit on the surface, feel greasy and attract dirt.
  • Let it absorb, then buff off any excess.
  • Test on a hidden area first, since conditioners can darken some leathers.

For riding gloves, keep conditioner light on the palms and fingers so grip is not reduced. Avoid heavy shoe grease there.

Cleaning motorbike and riding gloves

Motorcycle gloves take sweat, road grime and insects, so they need cleaning more often than dress gloves. The same principles apply, with a few extras:

  • Leather and mixed leather/textile gloves: wipe or hand wash as above using leather cleaner or a mild soap. A soft-bristled brush helps with seams, knuckle protectors and hook-and-loop fastenings.
  • Textile or mesh gloves without leather: these can often be hand washed, or machine washed on a gentle cycle at a low temperature if the label allows. Fasten the straps first and use a laundry bag. Skip fabric softener.
  • Waterproof gloves: wash gently with mild soap and lukewarm water, avoid soaking, and follow the label about turning the liner inside out, since doing so can damage some membranes.
  • Heated gloves: disconnect and remove batteries before cleaning. Never submerge or wring them.
  • Armour and hard protectors: wipe with a damp cloth. Don’t force water into the padding.

Dark dye can bleed a little into the wash water. Some minor colour transfer is not unusual with dark leather, but a lot of colour loss suggests you are using too much water or rubbing too hard.

If the gloves are your only protection on a bike, take extra care that stitching, fastenings and protectors are intact after cleaning. If you are unsure whether they are still safe to ride in, ask the maker or a specialist.

Cleaning white or light leather gloves

Pale leather shows dirt quickly and can also be easy to stain further. Some tips:

  • Test every product on a hidden area, because light leather can pick up a watermark or discolour.
  • Use a leather cleaner designed for light colours, or a very small amount of mild soap on a barely damp white cloth.
  • Work in small sections with gentle dabbing, and blend the cleaned area outward to avoid a visible tide mark.
  • Avoid dark-coloured cloths that might transfer dye.
  • Dry flat, away from heat and sun, because both can yellow pale leather.

Deeply set stains, or valuable gloves, are best left to a professional leather cleaner.

Household products: what to use and what to avoid

People often reach for what is in the cupboard. In general, products made for leather are the safer choice.

  • Dish soap (such as Dawn): designed to cut grease, so it can strip the oils from leather and leave it dry and stiff. If you ever use it, use a very small amount, rinse it thoroughly, and condition afterwards. A leather-specific or mild soap is a better choice. See which soaps are safe on leather.
  • WD-40: not a leather cleaner. It is a solvent-based product and can leave residue or change the look and feel of the leather. It is better avoided.
  • White vinegar: it is acidic, so it is best kept for occasional spot treatment, such as salt marks on winter gloves, diluted well, patch tested, wiped off with a damp cloth and followed by conditioner.
  • Baking soda: sometimes used to absorb odours or grease, and it should be brushed off rather than rubbed in. See our guide to getting a stinky smell out of gloves.
  • Saddle soap: made for thick, heavy leathers and can be too strong for thin glove leather. See how to use saddle soap on leather.
  • Rubbing alcohol, bleach, ammonia, petrol and other solvents: best avoided, as they can strip finish and dye.

Can you machine wash leather gloves?

Generally no. Agitation, hot water and spinning can shrink, stiffen and misshape leather. Our article on whether it is okay to wash leather in a washing machine covers this in more detail. The rare exceptions are gloves whose care label explicitly allows machine washing, which are typically textile gloves.

Smelly gloves

Sweat and trapped moisture cause most glove odours. Cleaning, thorough drying and rotating pairs make the biggest difference. For a full set of options, see how to get a stinky smell out of gloves.

Storing gloves

  • Keep them flat, or stuffed lightly with tissue or on glove forms, so the fingers do not crease.
  • Do not crumple them into a coat pocket or leave them in a hot car.
  • Store them somewhere cool, dry and ventilated, away from direct sun.
  • Make sure they are dry before putting them away to avoid mildew (see how to store leather so it doesn’t mold).

Cleaning other small leather accessories

The same ideas of minimal water, mild cleaner, slow air drying and light conditioning apply across small leather goods. Each item has its own quirks:

Quick reference

Glove type Cleaning approach Drying
Smooth leather (dress, driving) Wear-and-wash with leather cleaner or mild soap, minimal water Flat, room temperature, no heat
Leather work gloves Brush off dirt, damp cloth, mild soap Flat, room temperature, then condition
Leather and textile riding gloves Treat as leather, soft brush on details Flat, 24 to 48 hours is common
Suede or nubuck Suede brush and suede cleaner Air dry, avoid water
Textile only Follow care label, often gentle wash Air dry
Heated gloves Remove batteries, wipe gently Air dry, never wring

Keep exploring

Guides from other topics

All topics →