Leather Boots

How to Clean and Condition Leather Boots

A step-by-step guide to cleaning and conditioning leather boots, with notes on soles, suede, salt stains, brands like Red Wing and Panama Jack, and what to avoid.

On this page
  1. Start by identifying your leather
  2. What you need
  3. Step-by-step: cleaning smooth leather boots
  4. Conditioning: how much, how often and what if you leave it on too long
  5. Polish, beeswax and shine
  6. Cleaning the soles and welt (Red Wing and similar boots)
  7. Brand notes: Common Projects Chelsea boots and Panama Jack
  8. Suede and nubuck boots
  9. Salt stains and fur-lined boots
  10. Can you clean leather boots with hair conditioner?
  11. Products to avoid
  12. How often to clean
  13. Related guides

Start by identifying your leather

The right method depends on what your boots are made of, so check this first. Most leather boots fall into one of these groups:

Leather type How it looks and feels Cleaning approach
Smooth, finished leather Even color, some sheen Brush, damp cloth or leather cleaner, light conditioner, optional polish
Oil-tanned or waxed leather Slightly waxy, darkens when scuffed Brush, damp cloth, light conditioner or the maker’s recommended balm
Suede and nubuck Soft nap, no sheen Dry brushing and a suede eraser, no oils or wax
Coated or synthetic “vegan” leather Plastic-like surface Wipe with a damp cloth, no conditioners

If the maker publishes care instructions, follow those first. Brands know their finishes. Whichever method you use, try any new product on a hidden spot, such as the inside of the tongue or the back of the shaft, and let it dry before treating the whole boot.

What you need

  • A soft horsehair brush for the uppers and a stiffer brush for the soles
  • Two or three clean cloths (microfiber or old cotton T-shirts)
  • A leather cleaner or saddle soap, or a little mild soap and lukewarm water
  • A leather conditioner or balm suited to your boots
  • Optional: shoe polish in a matching color, a welt brush or old toothbrush, shoe trees

Step-by-step: cleaning smooth leather boots

  1. Remove the laces and insoles if they come out. This lets you reach the tongue, eyelets and welt, and helps the interior dry.
  2. Brush off loose dirt. Work the brush along the seams and where the upper meets the sole. Brushing first stops grit from being rubbed into the leather.
  3. Wipe with a barely damp cloth. Wring it out well. The leather should look slightly moist, not wet.
  4. Use a leather cleaner for stubborn grime. Work a small amount into a damp cloth or soft brush in small circles, then wipe it off with a clean damp cloth. Saddle soap is traditional but can leave the leather dry, so condition afterward. See how to use saddle soap on leather.
  5. Dry slowly. Let the boots air dry at room temperature, stuffed loosely with paper or fitted with shoe trees. Keep them away from radiators, heaters and hair dryers, since fast heat can stiffen and crack leather.
  6. Condition once fully dry.

For boots caked with mud, see our guide to cleaning mud off leather walking boots. Western boots have their own quirks, covered in how to clean leather cowboy boots.

Conditioning: how much, how often and what if you leave it on too long

Conditioner replaces some of the oils and waxes that leather loses over time. Apply a small amount on a clean cloth, work it in thinly, give it a short time to absorb (many products suggest somewhere between 15 minutes and an hour, so check the label), then wipe off the excess and buff.

If you leave conditioner on too long or apply too much, the usual result is a greasy or tacky surface that attracts dust, sometimes with darker patches. It is normally fixable: wipe the excess off with a dry cloth, and if the surface stays sticky, clean lightly and let the boots rest. Our article on whether you can oil your boots too much covers the signs and the fix.

Boots that are worn often or exposed to rain may need conditioning every few months. Boots that sit in a closet need much less. A good rule is to condition when the leather looks dry or pale, not on a fixed schedule.

If you are choosing between oils, see mink oil vs neatsfoot oil.

Polish, beeswax and shine

For smooth leather boots, polish adds color and a bit of protection, and shine comes from layers and buffing:

  1. Apply a thin layer of cream or wax polish with a cloth or dauber.
  2. Let it dry for a few minutes, then buff with a horsehair brush.
  3. For a higher shine, add further thin layers, buffing between each. Many people finish with a tiny amount of water on the toe cap, applied with a cloth. It takes patience, and it only works on smooth, finished leather. For the full technique, see how to get a mirror shine on leather shoes.

Beeswax-based products add water resistance as well as shine. To apply, rub in a thin layer, warm it gently with a hair dryer on low (not hot, and kept moving) so it soaks in, then buff off the excess. Beeswax can darken leather, so test first. See how to waterproof leather boots for a fuller comparison of wax, oil and spray.

Cleaning the soles and welt (Red Wing and similar boots)

Soles and welts collect more dirt than uppers, and they are usually more forgiving.

  • Brush dry dirt out of the tread and the welt stitching with a stiff brush.
  • For caked-on dirt, scrub with a brush and lukewarm water, with a little mild soap if needed.
  • Keep water off the leather upper while you do this.
  • Wipe dry and let the boots air out.

Many Red Wing boots have rubber or cork-and-rubber soles with a leather welt, and some have leather soles. Rubber and cork soles tolerate a brush and a damp cloth. Leather soles should not be soaked. Check what your pair uses. For the leather upper of a Red Wing, use the care products the maker recommends for that specific leather, since their oil-tanned and rough-out leathers are not treated like polished leather.

Brand notes: Common Projects Chelsea boots and Panama Jack

Common Projects Chelsea boots. Many are made from smooth, fairly delicate leather with a clean, minimal look, and some versions use suede. For smooth leather, brush gently, wipe with a barely damp cloth, and use a light conditioner or matching cream polish. Avoid heavy oils and wax that will change the color and finish. For suede versions, use the suede method below. Also check the care guidance that came with the boots.

Panama Jack boots. Many models use waxed, oiled or nubuck-type leather, which can look different depending on the style. Brush off dry dirt, wipe with a damp cloth, and avoid soaking them. Use a conditioner or balm intended for the finish you have, and test first, since oils can darken it. If you are unsure whether your pair is smooth, waxed or nubuck, run a fingertip over it: a napped, velvety surface means nubuck or suede.

Suede and nubuck boots

Suede and nubuck can be cleaned, but not like smooth leather. Brush with a suede brush in one direction, rub light marks with a suede eraser, and treat only with products labeled for suede or nubuck. Keep them away from conditioners, oils and wax, which can darken the nap. Water can mark them, so let them dry naturally if they get wet and brush the nap back up once dry. Our guide to cleaning nubuck boots has the full method.

Salt stains and fur-lined boots

Salt residue. White rings are common after winter. A common approach is to wipe the area with a cloth dampened with a solution of equal parts white vinegar and water, then wipe with a cloth dampened with plain water, dry slowly, and condition. Test first, and avoid this on suede. More in removing salt stains from leather and suede boots.

Fur-lined boots. Keep liquids out of the lining. (For sheepskin boots, see how to clean and care for UGG boots.) Brush out dirt, wipe the interior with a lightly damp cloth, sprinkle baking soda to absorb odors, and leave the boots to air out. If they smell, our guide on cleaning smelly boots has more options.

Can you clean leather boots with hair conditioner?

You will see this tip online, but hair conditioner is made for hair, not leather. It is not designed to nourish leather and may leave residue or affect the finish, and there is little evidence that it is better than a product made for leather. If you have nothing else on hand and the leather is tough and smooth, a very small amount on a hidden area is a low-stakes test, but we would not rely on it for boots you care about. A proper leather conditioner is a safer choice.

Products to avoid

  • WD-40. It is a solvent-based lubricant and water displacer, not a leather care product. It can leave an oily residue and may dry or darken leather over time, so we would not use it on boots you want to keep. See what WD-40 does to leather shoes.
  • Dish soap. A small amount of very diluted mild soap on a cloth is sometimes used on tough smooth leather, but strong or undiluted detergent can strip the finish and dry the leather. If you use it, rinse the cloth often, avoid soaking, and condition afterward. More in is Dawn dish soap good for cleaning leather?
  • Heat. Radiators, hair dryers and direct sun can crack leather and weaken the adhesives that hold soles on.
  • Washing machines. They can warp the leather and damage the construction.

How often to clean

Brush off dirt after muddy or dusty wear and wipe boots down every so often. Give them a fuller clean and condition when they look dirty or dry, which for regularly worn boots might be every few months. Rotating between two pairs gives each time to dry out.

Keep exploring

Guides from other topics

All topics →