Check what your Bearpaws are made of
Bearpaw boots are sheepskin-style boots, but the exact materials vary by model. Some have suede or leather uppers, some include synthetic or wool-blend linings, and some have a water-resistant treatment. Look at the label inside the boot or the original product page. The steps below suit suede and sheepskin-type surfaces. If your pair is labelled with different care instructions, follow those first.
What you need instead of sheepskin cleaner
- A soft brush, or a clean toothbrush for small areas
- A clean white eraser or a suede eraser
- Cold water and a few drops of mild soap, or a diluted white vinegar solution
- Two or three soft cloths or a sponge
- Plain paper or clean cloth for stuffing
Step-by-step cleaning
- Brush dry. With the boots dry, brush off loose dirt in one direction.
- Erase marks. Rub scuffs and shiny patches gently with the eraser, then brush again.
- Mix a mild solution. A few drops of mild soap in a bowl of cold water is enough. Skip hot water.
- Dab, don’t scrub. Wring a cloth almost dry, then blot the dirty area. Work from the outer edge of a mark inward.
- Rinse by blotting. Use a second cloth with plain cold water to lift soap residue.
- Blot dry. Press a dry cloth on the area to take up moisture.
- Stuff and dry. See the drying section below.
It often helps to lightly clean the whole panel of suede rather than one spot, so the cleaned area blends in.
Removing salt stains
Winter salt leaves pale, tide-mark stains. A commonly used home mix is about one tablespoon of white vinegar in a cup of cold water. Test it on a hidden spot first, since vinegar can affect some dyes. Dab the solution on with a cloth, let it work briefly, blot with plain damp cloth, then dry slowly and brush the nap. Several light passes are gentler than one heavy one. More in how to remove salt stains from leather and suede boots and how to clean suede with white vinegar.
Cleaning light or white suede
Light suede shows everything, so be patient. Start with a clean white eraser and a soft brush. If you need liquid, use plain cold water or very diluted soap, and avoid coloured cloths that could transfer dye. Dry away from sunlight, which can yellow or fade some light materials.
Odours and messy spills
For smells in the lining, sprinkle baking soda inside, leave it overnight, then shake it out or vacuum it with a brush attachment. For a biological mess, remove solids first, blot (don’t rub), then use the mild soap solution on the area. Strong or lingering odour may need repeat treatment or a professional clean. See also how to clean smelly boots.
Drying and finishing
Stuff the boots with plain paper or clean cloths so they keep their shape. Let them air dry in a cool, ventilated spot for a day or more. Do not use a dryer, radiator or hair dryer. Swap damp paper for fresh if it soaks up a lot of water. When fully dry, brush the suede in one direction to lift the nap.
What to avoid
- Machine washing and tumble drying
- Bleach and strong household cleaners
- Soaking the boots
- Abrasive pads, which can ruin the nap
Keeping them clean
A protector spray designed for suede (see how to waterproof suede shoes and boots) and a quick brush after wear go a long way. For the broader routine, see our guide on how to clean and care for UGG boots, which applies to most sheepskin-style boots. If they get soaked, read are my UGG boots ruined if they get wet.