Start with the leather type and the stain
Before you pick a cleaner, work out two things: what kind of leather you have, and how old the stain is. Most cleaning mistakes come from skipping this step.
- Finished (pigmented) leather has a protective surface coat. Most shoes, handbags and jackets are finished. Stains tend to sit on top, so they are the easiest to clean.
- Aniline, semi-aniline, pull-up and vegetable-tanned leather are far more absorbent. Liquids can soak in quickly and darken the leather, and some stains may not come out completely.
- Suede and nubuck have a fuzzy, napped surface. They generally need dry methods or products made for them, not a wet cloth and soap.
- Faux or coated synthetic leather does not absorb stains the way real leather does, but strong solvents can damage the coating.
A simple check on a hidden spot: place a drop of water on the leather. If it beads up, the surface is probably sealed. If it soaks in and darkens the leather within seconds, the leather is absorbent and you should be more cautious.
Fresh stains are almost always easier than dried ones. The longer a stain sits, the more likely it is to bond with the leather.
The basic method that works for most stains
For a fresh stain on finished leather, this order is a safe starting point:
- Blot, don’t rub. Press a clean white cloth or paper towel onto the stain to lift as much as you can. Rubbing spreads it and pushes it deeper.
- Brush off anything dry. Powder, dried mud or crusted dirt should be brushed away before any liquid goes near it.
- Spot-test. Try your cleaner on a hidden area, such as under the tongue of a shoe or inside a seam, and wait for it to dry.
- Use the gentlest cleaner first. A cloth wrung out until barely damp, with a leather cleaner or a very dilute mild soap, is the usual start. Work from the outside of the stain inward.
- Wipe off residue with a second cloth dampened with plain water.
- Dry naturally. Let the item air dry away from radiators, hairdryers and direct sun. Stuffing shoes loosely with paper or using shoe trees helps them keep their shape.
- Condition once dry. Cleaning removes some of the leather’s oils, so a suitable conditioner afterwards helps prevent drying and cracking.
Use white or undyed cloths so that no colour transfers onto the leather.
How to remove Holi colour from leather shoes
Holi colours are fine powders (and sometimes colour mixed with water), and shoes tend to collect them in seams, welts and stitching. The main rule is to treat the powder dry before anything else.
- Don’t wet the powder. Water can turn loose pigment into a stain that sinks into the leather. Move the shoes out of the way of any water.
- Shake and brush off as much loose colour as you can with a soft brush, working away from the shoe’s surface rather than grinding it in. A toothbrush can help in seams.
- Wipe with a barely damp white cloth. On finished leather, a lightly dampened cloth, with a few drops of mild soap if needed, will often lift surface colour. Dab and lift rather than scrubbing.
- Rinse the cloth often so you aren’t spreading pigment back onto the shoe.
- Dry naturally and condition once the shoes are fully dry.
If the colour has soaked into light, unfinished or suede leather, it may not come out completely. For suede or nubuck, stick to a suede brush and a suede eraser, and consider a specialist suede cleaner for what remains; our suede cleaner kit guide explains what to look for. If the shoes are valuable, a cobbler or professional cleaner is the safer choice.
If you know you will be at a Holi event, it is simplest to wear shoes you don’t mind staining. A leather protector spray applied beforehand may make cleaning easier, but it is no guarantee, so follow the product’s instructions and test it first.
How to remove red wine from tan leather shoes
Tan leather is often lightly finished or absorbent, which makes red wine harder to deal with. Water can also darken tan leather temporarily, so the goal is to work gently and keep the dampness even.
- Blot straight away with a clean white cloth. Press, lift, and use a fresh section each time.
- Dab with a lightly dampened cloth, working from the outside of the stain inward so the mark doesn’t grow.
- If a mark remains, use a leather cleaner designed for the type of leather, or a very dilute mild soap on a cloth wrung out well. Test first, because tan leather can change colour.
- Blend the dampness outward toward a seam or edge so that you don’t leave a new ring.
- Dry naturally and condition.
Wine on aniline or other absorbent tan leather can soak in and may leave a permanent mark. If that is what you are dealing with, a professional leather cleaner or colour restorer is often a better option than repeated DIY attempts. Our guide to red wine and coffee stains on leather covers this in more detail.
Stain-by-stain guide
Different stains behave differently. These guides go into the specifics:
- Ink: how to remove ballpoint ink from leather, and permanent marker and Sharpie
- Denim dye: removing jean dye transfer from a leather purse
- Salt: removing salt stains from leather and suede boots
- Water: removing water stains from leather
- Grease and oil: removing grease and oil stains from leather
- Blood: cleaning blood off leather shoes
- Scuffs: removing scuff marks from leather shoes
- Colour loss or patches: fixing discoloured leather
- Solvent damage: repairing an acetone spill on leather
- Mould and mildew: removing mold and mildew from leather
- Old, set-in stains: can old stains be removed from leather?
What not to use on leather shoes
Household products can be tempting, but several are more likely to cause damage than to help. Our full list of what not to use on leather shoes goes further.
- WD-40: Generally not recommended for removing stains from leather. It is a petroleum-based product that can leave an oily mark and darken the leather, creating a new stain. See what WD-40 does to leather shoes.
- Dish soap (such as Dawn): A tiny amount diluted in water, on a barely damp cloth, is sometimes used on finished leather, but dish soaps are designed to strip grease and can dry leather out if overused. Avoid it on suede, nubuck and unfinished leather, and always condition afterwards. More in is Dawn dish soap good for cleaning leather?
- Acetone and nail polish remover: These can dissolve the finish and colour. See what to do after an acetone spill.
- Hydrogen peroxide and bleach: These can lighten dyed leather. Read what hydrogen peroxide does to leather before trying it.
- Hot water, heat and soaking: Heat can shrink and stiffen leather, and soaking can leave water marks.
- Food oils such as olive or coconut oil: These can darken leather and are not a substitute for a proper conditioner.
Suede and nubuck
For suede and nubuck, start dry (our guide to cleaning suede shoes covers the full routine). A suede brush lifts loose dirt, and a suede eraser can rub out small marks. Avoid soaking the surface. For liquids, blot immediately, let the area dry, then brush the nap back up. Specialist suede cleaners exist for stubborn marks, and a protector spray made for suede can help prevent future stains.
After cleaning: dry, condition, protect
Once the stain is gone and the leather is fully dry, apply a small amount of a conditioner suited to your leather type, using a soft cloth. Skip conditioning on faux leather. If you want extra protection, a leather protector spray can help repel liquids, but test it on a hidden spot first as some can alter colour or finish.
When to stop and see a professional
Consider a professional leather cleaner or restorer if:
- the stain has set for days or weeks and your first gentle attempts haven’t helped
- the item is valuable, vintage or made from aniline, suede or exotic leather
- the finish or colour has started to lift, or the surface feels sticky
- a large area is stained
Stopping early often leaves more options open than several rounds of stronger products.