Leather Stains

How to clean blood off leather shoes?

Blood on leather shoes is easiest to treat when fresh. Use cold water, gentle blotting and mild soap, and avoid heat. Here's the full method.

On this page
  1. Quick answer
  2. Step by step for fresh blood
  3. Removing dried blood
  4. Should you use hydrogen peroxide?
  5. Suede and nubuck shoes
  6. White and light-coloured shoes
  7. What to avoid
  8. A note on safety

Quick answer

Act quickly and use cold water, never hot. Blot the blood with a clean cloth, then dab the stain with a cloth dampened with cold water and a little mild soap or leather cleaner, working from the outside of the stain inward. Wipe off residue with a cold, damp cloth, let the shoes air dry away from heat, and condition the leather once dry. Test on a hidden spot first.

Step by step for fresh blood

  1. Blot straight away. Use a dry, clean cloth or microfiber towel and press gently. Don’t rub or scrub.
  2. Spot-test. Dab your cleaner on a hidden area, such as the inside near the tongue, to check for dye bleeding or discolouration.
  3. Mix a gentle cleaner. Use cold water with a small amount of mild liquid soap or a leather cleaner, or a neutral saddle soap diluted as directed. Dip a white cloth, and wring it out so it’s damp, not wet.
  4. Dab from the outside in. Working inward from the edge helps stop the stain spreading. Switch to clean parts of the cloth as the blood transfers.
  5. Rinse with a cold damp cloth to remove soap residue, then blot dry.
  6. Air dry at room temperature, away from radiators, hairdryers and direct sun. Stuff shoes with paper to help them hold shape.
  7. Condition once fully dry to replace the moisture that cleaning can remove.

Cold water matters because heat can set blood into the material, making the stain harder to shift.

Removing dried blood

Dried blood is harder, but often not impossible on finished leather. Dampen a clean cloth with cold water and hold it on the stain for a short time to soften it, then blot and dab with the same mild cleaner as above. Repeat in short rounds, and let the leather dry between attempts rather than soaking it. Don’t scrape the dried blood, because that can scratch the finish. If the stain is still there after several gentle tries, a professional leather cleaner is the safer next step.

Should you use hydrogen peroxide?

Some people use 3% hydrogen peroxide on blood because it breaks it down effectively on many fabrics, but on leather it can bleach or discolour dyed finishes. If you want to try it, treat it as a last resort, test on a hidden spot, use only a tiny amount on a swab, and stop if the colour changes. Our article on what hydrogen peroxide does to leather explains the risks. Never mix peroxide with vinegar or other cleaners.

Suede and nubuck shoes

Avoid wetting suede and nubuck more than necessary. Blot fresh blood gently, let it dry, then try a suede brush and eraser to loosen the dried stain. If that isn’t enough, use a cleaner made for suede and nubuck, following the label; our suede cleaner kit guide explains the options. A very slightly damp cloth may be used with care, but water can leave marks on napped leather, so many people prefer a specialist.

White and light-coloured shoes

Light leather shows both stains and cleaning damage more. Use the gentlest method, test carefully and avoid peroxide and strong chemicals. If a pink or brown shadow remains, repeat light cleaning rather than escalating. A leather repair specialist can sometimes restore colour. For everyday care, see how to clean white leather trainers.

What to avoid

  • Hot water
  • Bleach and ammonia
  • Hairdryers and other direct heat
  • Washing machines
  • Soaking the shoes
  • Hard scrubbing

For other marks, see the main leather stain removal guide.

A note on safety

Dried blood can carry infection risks. If the blood isn’t your own, wear gloves when cleaning.

The complete guide to leather stains

How to Remove Stains from Leather Shoes and Goods
Read the guide

Keep exploring

Guides from other topics

All topics →