Quick answer
Blot up any excess grease straight away without rubbing, then cover the stain with an absorbent powder such as cornstarch, baking soda or talcum powder and leave it for several hours or overnight so it can draw the oil out. Brush the powder off and repeat if needed. If a mark remains, use a leather cleaner after a spot test, then condition. Don’t use heat.
Step by step
- Blot immediately. Press a clean, dry cloth or paper towel onto the grease, working from the edge inward. Don’t rub or scrub, which pushes oil deeper and spreads the stain.
- Cover with absorbent powder. Sprinkle cornstarch, baking soda or talcum powder generously over the stain. For fresh stains, a few hours may help; overnight is better for heavier ones.
- Brush off the powder gently with a soft brush or dry cloth, taking care not to scratch the finish.
- Repeat with fresh powder if you can still see oil. Several rounds are often better than one.
- Clean the remaining mark. If a stain is left, use a leather cleaner designed for your leather, or a barely damp cloth with a drop of mild soap on finished leather. Spot-test in a hidden area first, and avoid bleach, ammonia and strong chemicals.
- Wipe, then dry naturally. Use a cloth dampened with plain water to remove residue and let the item dry away from radiators or direct sun.
- Condition the leather once dry, since powders and cleaners can take some natural oils with them. (Skip conditioner on faux leather.)
Speed matters. The sooner you treat grease, the more of it the powder can pull out before it settles into the leather.
Old or stubborn stains
Grease that has been in the leather for a while can be difficult. You can repeat the powder treatment several times over a few days, which sometimes lightens older marks gradually. A thicker paste of cornstarch and a little water is mentioned in some guides, but wetting absorbent leather can leave water marks, so it is better suited to sealed leather. If a dark patch persists after several attempts, the oil may have soaked into the fibres. A professional leather cleaner can sometimes help, using products and tools not available to most households.
By leather type
- Finished (pigmented) leather: Usually the most forgiving. The powder method then a gentle cleaner usually works well.
- Aniline and unfinished leather: These absorb grease quickly and can darken easily. Blot lightly, use dry absorbents, and avoid soaking. The stain may leave a darker patch, so manage expectations.
- Suede and nubuck: Stay dry. Use powder to absorb oil, brush it off with a suede brush, and try a suede eraser on what’s left. Avoid liquids at first. Our guide to removing oil and grease stains from suede goes step by step.
- Faux or PU leather: Grease usually sits on the surface. Mild soap and water on a cloth is typically enough, and you can skip the powder.
Body oils and skin oils
Dark, shiny patches on collars, sofa arms and bag handles are often from body oils and hand grease rather than a spill. A leather cleaner used regularly, followed by conditioner, usually handles these. Avoid piling on heavy oils or conditioners, because too much product can itself darken leather and attract more dirt.
What to avoid
- Rubbing or scrubbing the stain
- Hairdryers and radiators, which can set the oil and dry the leather
- Soaking the leather
- Kitchen oils as a “conditioner” (see can I use olive oil to condition my leather?)
- Harsh solvents, which can strip colour and finish; see acetone damage on leather
If you’ve lost colour while cleaning, see how to fix discoloured leather. For other marks, our leather stain removal guide has the full list.
When to see a professional
Call a leather specialist for large grease stains on furniture, valuable or aniline items, or marks that keep reappearing as the leather dries.