Nubuck vs suede: what is different
Nubuck is leather that has been lightly sanded or buffed on the outer (grain) side, which gives it a fine, velvety surface. Suede is normally made from the inner side of the hide and has a longer, softer nap. Nubuck is generally considered a bit tougher and has a shorter, tighter nap, which is why it is common on walking boots and boat shoes. Cleaning is similar, but nubuck can show scuffs and polish marks easily, so a light touch matters just as much.
If you are not sure which you have, the care label or product page is the best source. When in doubt, treat it as suede: dry methods first. Our guide to cleaning suede shoes covers the same basics.
What you need
- A nubuck or suede brush (a brass or crepe-style brush is sometimes included in kits, but check the product says it suits your leather)
- A nubuck or suede eraser
- A clean white or microfiber cloth
- A nubuck-safe cleaner or foam, if needed
- Paper or boot trees
- A water and stain repellent made for nubuck
Cleaning nubuck step by step
- Let the boots dry at room temperature if they are damp. Don’t brush wet nubuck.
- Remove the laces and stuff the boots with paper or boot trees.
- Brush off loose dirt. Use gentle strokes in one direction.
- Rub scuffs with an eraser, then brush away the residue.
- Treat stains carefully. For a stubborn mark, use a nubuck-safe cleaner as directed on the label, or a barely damp white cloth, and blot rather than rub. Test on a hidden area first.
- Dry slowly away from radiators, fires and direct sun. Stuffed paper helps absorb moisture and keep the shape, but replace it if it gets damp.
- Brush again once dry to even out the finish.
Oil marks respond to cornstarch left on the spot for several hours and then brushed off. Our article on removing oil and grease stains from suede works for nubuck too.
Nubuck walking boots after a muddy hike
For walking boots, the main job is getting mud off before it dries into the leather and seams (smooth-leather pairs are covered in how to clean mud off leather walking boots):
- Knock off the worst of it, then let the rest dry and brush it away. Or, if the mud is stubborn, rinse lightly with cool water and a soft brush. Manufacturers differ on this, so check your boot’s care instructions first.
- Clean around the welts and tongue gussets, where grit collects and wears stitching.
- Dry the boots slowly at room temperature. Direct heat can stiffen leather and damage glue.
- Re-proof with a product made for nubuck once the boots are fully dry.
Some outdoor brands do recommend a controlled wash with water and a nubuck-specific cleaner for hiking boots. If your boots have a waterproof membrane, follow the maker’s own care guidance.
Cleaning nubuck Sperrys
Sperry boat shoes in nubuck are usually cleaned the same way as other nubuck shoes: dry brush, eraser, then a nubuck-safe cleaner or lightly damp cloth for stains. Salt marks and water spots are common on boat shoes, so go gently and blot instead of scrubbing. If the shoes are a different leather, check the label before using a product made for nubuck. Smooth leather pairs are covered in how to clean leather boat and deck shoes.
Can you use water on nubuck?
Some water is generally tolerated, but heavy wetting is a risk. Nubuck can darken, develop water marks and dry stiff if soaked. A barely damp cloth on a small area is the most you would normally want. Many people avoid water entirely and rely on brushing, erasers and nubuck-specific cleaners. Our article on whether suede is ruined once it gets wet explains what to do after a soaking, and the same steps apply to nubuck.
Dubbin, polish and shine
Dubbin and other waxy or oily dressings are usually meant for smooth, full-grain leather. On nubuck they can darken the surface, flatten the nap and leave it looking greasy, so most care guides advise against them unless the product explicitly says it is safe for nubuck. Likewise, regular shoe polish is not suited to napped leather.
If you are wondering how to make boots “shine like glass”, that is a smooth-leather polishing technique (see how to get a mirror shine on leather shoes). Nubuck is not designed to shine, and you can’t get that finish without ruining the texture.
Magic erasers and dish soap
Melamine “magic” erasers are mildly abrasive, so they can wear down or discolor the nap. A suede and nubuck eraser is the safer option. Dish soap is also usually best avoided, since it can leave residue and strip the finish. If you decide to try diluted soap, keep it to a tiny amount on a barely damp cloth and test first.
Proofing after cleaning
Once the boots are completely dry, apply a protector designed for nubuck in thin, even coats. Our guide to waterproofing suede shoes and boots explains the process, and the same advice generally applies to nubuck. If your boots are Timberlands, see our article on cleaning Timberland boots.