Suede and Nubuck

How to Clean Timberland Boots (With or Without the Care Kit)

How to clean Timberland boots using the brand's care kit or common household alternatives, plus stain tips and what to avoid on nubuck and suede finishes.

On this page
  1. First, identify your Timberland’s material
  2. Using the Timberland care kit
  3. Cleaning Timberlands without suede cleaner
  4. Removing stains
  5. Dish soap and WD-40: what to know
  6. Making Timberlands look new again
  7. Drying and protecting

First, identify your Timberland’s material

Timberland boots are not all one material. The classic wheat boot is nubuck, but the brand also makes suede, smooth leather and fabric-and-leather styles. Check the label, tongue tag or product page. The right method depends on it:

  • Nubuck or suede: dry brush, eraser, then a product made for napped leather.
  • Smooth leather: a damp cloth, a leather cleaner and conditioner, as in our guide to cleaning and conditioning leather boots.
  • Mixed materials: clean each part separately.

The basics for napped leather are the same as in our guide to cleaning nubuck boots and our general suede cleaning guide.

Using the Timberland care kit

Timberland’s boot kit has been described as including a handled brush, a towel and three products: a boot cleaner, a boot conditioner and a water and stain repellent. Kit contents can change, so read the labels and instructions in your own box first. In general, the order works like this:

  1. Remove the laces so you can reach the tongue and eyelets.
  2. Brush off loose dirt and debris. Go over the boots twice if they are very dirty.
  3. Wipe the surface with a warm, barely damp cloth.
  4. Apply the cleaner to the material it is meant for, using the applicator or a sponge as directed. Work in small areas rather than flooding the leather.
  5. Wipe off any residue with a clean cloth.
  6. Let the boots dry at room temperature, away from direct heat.
  7. Apply the conditioner or protector only if the product says it suits your boot’s finish. Nubuck needs products made for it.
  8. Brush or buff with the brush once dry.
  9. Wash the laces separately and re-lace.

Timberland also sells a foaming cleaner aimed at nubuck and suede finishes, so check that you have the right product for your boot.

Cleaning Timberlands without suede cleaner

If you have no kit or dedicated suede cleaner, a few safer steps often work for light dirt:

  • Dry brush. A soft brush (or clean toothbrush) in one direction removes more than most people expect.
  • Suede or nubuck eraser. It lifts scuffs and shiny marks. A clean white pencil eraser can work on small marks.
  • Barely damp white cloth. For marks that remain, blot gently with a cloth dampened with water or a very small amount of white vinegar, after testing a hidden spot. See cleaning suede with white vinegar for the risks.
  • Cornstarch for grease. Leave it on for several hours and brush it off.

Avoid soaking, hot water and the washing machine. Water can darken nubuck, and machine washing can damage the leather and glue.

Removing stains

  • Grease or oil: blot, cover with cornstarch, leave for hours, brush off. Details are in our article on removing oil and grease stains from suede.
  • Mud: let it dry, then brush it away before using any liquid.
  • Water spots: often fade after drying and brushing. If they don’t, a lightly dampened cloth across the whole panel can even things out, but test first.
  • Salt marks: a barely damp cloth, then drying and brushing. See removing salt stains from leather and suede boots.

Stubborn or old stains may need a specialist or the manufacturer’s recommended product.

Dish soap and WD-40: what to know

Dish soap is often suggested online, but it can leave residue and strip finishes on nubuck and suede, so most care guides advise against it. If you do use it, use only a drop diluted in water, on a barely damp cloth, after testing. For smooth leather, a leather cleaner is a better choice.

WD-40 is sometimes mentioned for boots, but it is a lubricant and solvent, not a leather care product. It can darken leather and leave an oily finish, and it is not a good idea on nubuck or suede. I’d leave it out of your routine. More in what WD-40 does to leather shoes.

Making Timberlands look new again

Restoring the look usually comes down to:

  1. Brushing thoroughly to lift the nap.
  2. Erasing scuffs and shiny spots.
  3. Cleaning stains with a suitable product.
  4. Letting the boots dry fully.
  5. Brushing again and applying a protector.

Boots that are faded or heavily worn may not return to new, but they often look much better after a proper clean.

Drying and protecting

Stuff the boots with paper to help absorb moisture and hold their shape, replacing it when damp. Keep them away from heaters. Once dry, a water and stain repellent made for nubuck helps protect them. See our guide to waterproofing suede shoes and boots for application tips. If you are choosing a ready-made kit, our overview of suede cleaner kits may help.

The complete guide to suede and nubuck

How to Clean Suede Shoes Without Ruining Them
Read the guide

Keep exploring

Guides from other topics

All topics →