Leather Shoes

How to Get a Mirror Shine on Leather Shoes

How to polish leather shoes for a mirror shine: prepare the leather, build thin wax layers on the toe and heel, use a little water, and buff patiently.

On this page
  1. What a mirror shine is
  2. What you need
  3. Step by step
  4. Troubleshooting
  5. Keeping the shine

What a mirror shine is

A mirror shine (often called a spit shine or high shine) is a glossy finish built up from many thin layers of wax polish. It is usually done on the toe cap and the heel, where the leather is firm and flexes least, and less so on the creased vamp. It works best on smooth, good-quality leather that is clean, supple and free of cracks. It will not work well on suede, nubuck or heavily scuffed leather.

What you need

  • A brush for removing dirt and a clean horsehair brush for buffing
  • Leather cleaner and conditioner, if the shoes need them
  • Wax polish in a matching colour or neutral
  • A soft, lint-free cotton cloth (an old cotton t-shirt or a polishing cloth works)
  • A small bowl of water
  • Patience: the first time can take an hour or more

Step by step

  1. Clean the shoes. Remove laces, brush off dirt, and wipe with a damp cloth. Remove old, flaky polish if there is build-up. See how to clean leather shoes.
  2. Condition if needed and let it absorb fully. Dry leather will not hold a good shine.
  3. Wrap the cloth tightly over your index and middle fingers, so the surface is smooth with no wrinkles.
  4. Apply a thin layer of wax polish to the toe cap in small, light circles. Cover the surface, then stop. Thick layers dry cloudy.
  5. Add a drop of water to the cloth, or dab a fingertip in water and touch the cloth. Keep working in small circles with light pressure. The water helps the wax spread evenly and lets you build layers without clogging.
  6. Let it dry for a minute or two, then repeat with another thin layer of wax and a drop of water.
  7. Keep going until the surface looks glossy and smooth. This typically takes several layers.
  8. Finish with a light buff using a clean part of the cloth, or a soft nylon or cotton cloth, using brisk, short strokes.
  9. Repeat on the heel, and apply a normal wax shine on the rest of the shoe. Basic waxing steps are in how to wax leather shoes properly.

Troubleshooting

  • Cloudy or streaky finish: too much wax or too much water. Let it dry, then buff with a clean cloth, or wipe off the layer with a barely damp cloth and start again.
  • Wax cracking: the layers are too thick or the leather is too creased at that point. Keep the high shine to the toe and heel.
  • Dull results: the leather may be dry, or the surface may have old polish build-up.
  • Dust and fingerprints: wipe with a clean, dry cloth.

Keeping the shine

Avoid water, which can leave marks on a high-shine finish, and wipe shoes with a soft cloth after wearing. Store with shoe trees. Reapply a thin layer of wax occasionally rather than rebuilding from scratch. To soften deep creases around the vamp before polishing, see how to remove creases from leather shoes.

The complete guide to leather shoes

How to Clean Leather Shoes: A Step-by-Step Guide
Read the guide

Keep exploring

Guides from other topics

All topics →