Mold and Mildew

How to clean mold off leather shoes?

To clean mold off leather shoes, brush off spores outdoors, wipe with a diluted vinegar or alcohol solution, dry slowly and condition. Includes insoles and smell tips.

On this page
  1. Short answer
  2. What you need
  3. Step by step
  4. Inside the shoe: insoles, lining and smell
  5. Does vinegar kill mold on leather shoes?
  6. What does WD-40 do to leather shoes?
  7. Suede and nubuck
  8. Can mildewed leather shoes be saved?
  9. Keeping mold from coming back
  10. FAQ

Short answer

To clean mold off leather shoes, take them outside, wear a mask and gloves, and brush off loose spores. Then wipe the leather with a cloth that is only slightly damp, using a leather cleaner or a mix of water with white vinegar or rubbing alcohol (many guides use roughly equal parts, after a spot test). Let the shoes dry slowly in a ventilated place away from heat and direct sun, then apply leather conditioner once they are fully dry.

For other items and a wider look at the problem, see our guide to removing mold and mildew from leather.

What you need

  • Mask and disposable gloves
  • A soft brush (a clean horsehair shoe brush works well) and cotton swabs
  • Clean cloths you can throw away
  • Leather cleaner, or white vinegar or isopropyl alcohol, plus water
  • Leather conditioner
  • Shoe trees, or clean acid-free paper or cotton cloth for stuffing

Step by step

  1. Go outside. Mold spores are easily spread, so work in fresh air and keep the shoes away from other footwear and clothes.
  2. Remove laces and insoles. Take out removable insoles and laces so you can reach the inside and clean or replace them separately.
  3. Brush off loose mold. Use light, single-direction strokes. Throw away cloths afterward, and clean the brush (some people wipe it with diluted alcohol).
  4. Spot test. Try your cleaner on a hidden area, such as the tongue or the inner arch, and let it dry. Check for darkening or fading.
  5. Wipe the leather. Dampen a cloth, but do not soak it, and wipe the upper using gentle strokes. Use a cotton swab or small brush along the welt, seams, stitching, eyelets and creases, where mold hides.
  6. Wipe off residue. Go over the shoe with a cloth dampened with plain water, then pat dry.
  7. Dry slowly. Stuff the shoes loosely with clean paper or cotton, or fit shoe trees, and leave them somewhere ventilated and shaded. Avoid radiators, hair dryers and strong sun, which can warp and crack leather. Replace damp stuffing as it absorbs moisture.
  8. Condition. When the shoes are completely dry, apply a thin layer of conditioner or shoe cream suited to the leather. Cleaning can remove natural oils, so skipping this step can leave the leather dry.
  9. Polish if you normally do. Polish and waxes can help protect the surface once the shoes are dry. See how to wax leather shoes properly.

Inside the shoe: insoles, lining and smell

Mold often starts inside, where sweat and warmth linger.

  • Wipe the lining with a lightly dampened cloth. Take care not to soak leather or fabric linings.
  • Wash or replace removable insoles. Foam insoles can hold mold and smell, and replacing them is often easier than saving them.
  • Wash fabric laces on their own or replace them.
  • For odor, sprinkle baking soda inside overnight and shake or vacuum it out afterward, or leave activated charcoal or odor-absorbing inserts in the shoe for a few days. See also how to clean smelly boots.

What neutralizes the smell of mold?

Fresh air, thorough drying, baking soda, activated charcoal inserts, and removing the mold source all help. If the smell stays after cleaning, drying and a couple of days of airing, mold may remain deeper in the lining or sole.

Does vinegar kill mold on leather shoes?

Diluted white vinegar is one of the most common home treatments and often works on surface mold. It is acidic, however, and can dry or lighten some leathers, so dilute it, test it first, and condition the shoes afterward. Diluted rubbing alcohol is another common option and has similar drawbacks. A dedicated leather cleaner is generally the gentlest choice. Opinions among leather professionals differ, and none of these is risk free.

What does WD-40 do to leather shoes?

WD-40 is a petroleum-based lubricant and water displacer rather than a leather care product. It is sometimes mentioned in forums for quieting squeaks or loosening stiff leather, but it can darken leather, leave an oily residue, attract dirt and dry out the leather over time. It is not a recognised mold remover. A leather cleaner followed by conditioner is a safer choice. Our full answer on what WD-40 does to leather shoes has more.

Suede and nubuck

Suede and nubuck mark easily when wet, so the methods above are risky. For routine care, see how to clean suede shoes.

  • Brush the mold off outdoors with a suede brush.
  • Use only products made for suede and nubuck, and spot test.
  • Because liquids can leave permanent marks, a cobbler or suede specialist may be a safer option for valued pairs.
  • Some sources suggest alcohol-based methods for suede, but results are not guaranteed and repeated use can dry the material.

Can mildewed leather shoes be saved?

Often yes, especially if you catch the mold early. Signs that a pair may not be worth saving include:

  • Dark staining that remains after careful cleaning
  • Leather that feels spongy, weak or crumbly
  • A musty smell that returns after drying
  • Mold inside glued or layered parts, soles or padding
  • Cheap bonded or faux leather that peels when cleaned

If the shoes are expensive or hard to replace, a cobbler may be able to deep clean them, replace insoles or refresh the lining. If the mold returns, taking them to a cobbler or replacing them is the sensible next step.

Keeping mold from coming back

  • Let wet or sweaty shoes dry naturally at room temperature, away from direct heat.
  • Use shoe trees or stuffing to absorb moisture and keep the shape.
  • Rotate pairs so shoes can air between wears.
  • Store shoes clean and dry in a cool, ventilated space. Avoid sealed plastic boxes, basements and damp garages.
  • Silica gel packs can help in humid spaces.
  • Clean and condition leather regularly.

For more, see how to store leather so it doesn’t mold. If you have a bag with the same problem, see how to clean mould off a leather bag or handbag.

FAQ

Is it safe to wear shoes after cleaning off mold?

Once the shoes are fully dry, clean, and free of musty smell, many people wear them again. If the mold returns or you notice irritation, stop wearing them.

Can I put moldy leather shoes in the washing machine?

It is not recommended. Soaking and tumbling can warp, stain and damage leather and glue. See can you clean leather shoes in the washing machine.

Should I use bleach?

No. Bleach can strip colour and damage leather.

The complete guide to mold and mildew

How to Remove Mold and Mildew from Leather
Read the guide

Keep exploring

Guides from other topics

All topics →