Short answer
WD-40 is a petroleum-based solvent and lubricant, not a leather-care product. On leather shoes it may lift certain marks and add a temporary sheen, but it also leaves an oily residue and can darken, soften or otherwise change the leather and its finish. For that reason I would not recommend it for regular cleaning or conditioning, especially on shoes you care about.
What WD-40 is
WD-40 was designed to displace water and to lubricate and protect metal. It is a mixture of solvents and oils. That makes it useful for stuck hinges and squeaky mechanisms, but those same solvents are not chosen with leather’s finish, dyes or natural oils in mind.
Some “uses for WD-40” lists online include shining or waterproofing shoes. Those lists are general household tips, not leather-care advice, and I would treat their claims with caution.
What it can do to leather
Results depend on the leather and the finish, and manufacturers do not give leather-care guidance for it, so these are general risks:
- Darkening or blotching, particularly on lighter or unfinished leather
- Oily or greasy feel, which can attract dust and dirt
- Dissolving or softening finishes, which may affect colour or gloss
- Smell, which can linger for some time
- Possible effects on adhesives and other materials in the shoe, such as soles and linings
On suede and nubuck, an oily spray is especially likely to leave dark, flattened patches that are hard to reverse; see how to remove oil and grease stains from suede.
Safety note: WD-40 is flammable. Use sprays outdoors or in a ventilated space, keep them away from heat and flames, and keep out of reach of children and pets.
Can WD-40 remove stains or scuffs from leather?
Sometimes it loosens a scuff, a marker line or sticky residue, but it is a gamble. It can remove the mark along with the finish, or leave a darker patch where it was applied. Safer first steps are a damp cloth with a little mild soap or a leather cleaner. For specific marks, see how to remove scuff marks from leather shoes and how to remove permanent marker from leather. For patent leather in particular, see how to clean patent leather shoes.
Squeaky shoes
Squeaks usually come from friction between the insole and the shoe, between layers, or from the sole. WD-40 is sometimes sprayed on the squeaking spot. If you try it, a very small amount applied to a cloth and used away from the leather upper is lower risk than spraying the shoe, but it is better to find the cause first. Sprinkling talcum or baby powder under the insole is a common gentler fix, and a cobbler can deal with a sole or stitching issue.
If you already used it
- Blot any excess with a clean, dry cloth, without rubbing it in.
- Wipe gently with a cloth lightly dampened with water and a tiny amount of mild soap to remove surface oil (more in how to remove grease and oil stains from leather).
- Wipe with plain water and let the shoes dry at room temperature.
- Test a hidden spot, then apply a leather conditioner if the leather looks dry.
If the leather has darkened or the finish looks damaged, a professional leather or shoe repairer may be able to help, although there is no guarantee of a full fix.
Better alternatives
- A leather cleaner or saddle soap for dirt
- A leather conditioner or cream for dryness
- A beeswax-based or similar wax for protection; see how to waterproof leather shoes
For a wider list of products to avoid, see what not to use on leather shoes, and for the normal routine, how to clean leather shoes.