Leather Shoes

How to Wax Leather Shoes Properly

A practical guide to waxing leather shoes: what wax polish does, how to apply thin layers, how to buff, and the mistakes that leave shoes cloudy or sticky.

On this page
  1. What wax polish does
  2. Wax vs cream
  3. What you need
  4. Step by step
  5. Common mistakes
  6. Vaseline and other shortcuts
  7. How often should you wax?

What wax polish does

Wax polish puts a thin layer of wax and pigment on the surface of smooth leather. It helps in three ways:

  • Shine: wax can be buffed to a glossy finish.
  • Protection: the layer helps resist light moisture and scuffs.
  • Colour: pigmented wax covers small marks and refreshes the colour.

Wax does not feed the leather the way a conditioner does, so it works best on shoes that are already clean and reasonably supple. It is for smooth leather only, and it should not be used on suede or nubuck.

Wax vs cream

Shoe cream is softer and tends to condition and recolour more; wax is firmer and tends to protect and shine more. Many people use cream first and wax on top. If your shoes look dry, condition them first. If they are only dull, wax alone can be enough.

What you need

  • A soft brush for removing dirt
  • Wax polish in a matching or neutral colour
  • Two soft cotton cloths, or an applicator brush or dauber
  • A clean horsehair brush for buffing
  • Optionally, a leather cleaner and conditioner

Step by step

  1. Clean the shoes. Remove laces, brush off dirt, and wipe with a damp cloth if they are dirty. Let them dry completely. See how to clean leather shoes for the full method.
  2. Condition if needed. If the leather looks dry, apply a little conditioner or cream and allow it to absorb.
  3. Apply a small amount of wax. Wrap a soft cloth around two fingers, pick up a little wax and apply in small circles. Start with the toe cap, then the sides and heel. Less is better; thick wax can look cloudy.
  4. Work it into the seams with a soft brush or the cloth.
  5. Let it dry. Give it around 10 to 15 minutes, or whatever the product instructions say.
  6. Buff. Use a horsehair brush with short, brisk strokes, then a clean cloth for a final shine.
  7. Repeat if you want more shine. Add another very thin layer and buff again. For a glass-like toe, see how to get a mirror shine on leather shoes.

Common mistakes

  • Too much wax. It builds up, cracks and looks sticky.
  • Waxing dirty shoes. This traps grit under the polish.
  • Wrong colour. Test on a hidden spot, since coloured wax can stain.
  • Skipping the buff. Wax that isn’t buffed stays dull.
  • Waxing patent or suede. These need different care; see how to clean patent leather shoes for patent and how to clean suede shoes for suede.

Vaseline and other shortcuts

Petroleum jelly is sometimes used to add shine to leather shoes. It can give a temporary gloss, but it can darken leather, attract dust, and it does not provide the same protective finish as shoe wax. I would treat it as a last resort and use it very sparingly. See also what not to use on leather shoes.

How often should you wax?

This depends on wear. A common routine is a light wax every few wears for dress shoes, and a full clean, condition and wax every month or two. Cracking wax or a dull finish suggests it is time for a clean and a fresh coat. Waxing can also contribute to water resistance, though dedicated methods are covered in how to waterproof leather shoes.

The complete guide to leather shoes

How to Clean Leather Shoes: A Step-by-Step Guide
Read the guide

Keep exploring

Guides from other topics

All topics →