Short answer
Usually not. A single soaking does not automatically ruin boots, especially quality leather boots that you dry properly. Damage mostly comes from repeated soaking, drying too fast with heat, or leaving boots wet for a long time, which can lead to stiffness, cracking, water stains, mold and weakened glue.
What water does to leather
- It can strip oils. Leather relies on oils and waxes to stay supple. Repeated wetting and drying can leave it stiff and more likely to crack.
- It can leave marks. As water evaporates, it can leave rings or streaks, particularly on lighter leather and suede. Road salt can leave white marks.
- It can affect construction. Boots left saturated for a long time can lose shape, and the adhesives or stitching in the sole area can suffer.
- It can cause mold. Damp boots left in a closet or bag are a common place for mildew.
What to do right away
- Wipe off excess water and mud with a cloth. Brush off any dirt.
- Take out the insoles and loosen or remove the laces so air can get inside.
- Stuff the boots loosely with paper or fit boot trees. Replace the paper when it is soaked. Don’t pack it so tightly that it stretches the leather.
- Let them dry slowly at room temperature in a ventilated room.
Drying dos and don’ts
Do:
- Be patient. Thoroughly wet boots can take a day or two.
- Use a gentle boot dryer if you have one, as it moves air without strong heat.
- Reshape the boots with trees while they dry.
Don’t:
- Put them on a radiator, next to a heater or fire, or in front of a hair dryer. Fast heat can make leather shrink, stiffen and crack.
- Leave them in direct sun for hours.
- Store them wet in a sealed bag or cupboard.
After they’re dry
Leather that has been wet will often feel a little stiff or look dry. Brush off dried mud, then apply a small amount of conditioner, sparingly, since the goal is to restore suppleness rather than saturate the leather. Our guide to cleaning and conditioning leather boots covers the process, and can you oil your boots too much? explains how to avoid overdoing it.
Water stains, salt and mold
- Water stains: Sometimes a light, even wipe with a damp cloth over the whole panel, followed by slow drying, evens out the marks. Test first. Persistent stains may need a leather cleaner or a cobbler. Our guide to removing water stains from leather has the full method.
- Salt marks: A cloth dampened with equal parts white vinegar and water is a common remedy for smooth leather, followed by a cloth with plain water, slow drying and conditioning. Avoid it on suede. See removing salt stains from leather and suede boots.
- Mold: Wipe with a lightly dampened cloth and a diluted vinegar or alcohol solution, use sparingly, and dry thoroughly in a ventilated space. For a fuller method, see how to remove mold and mildew from leather. If mold keeps coming back, or the lining smells musty after drying, see our guide to cleaning smelly boots.
When boots really are damaged
Signs that cleaning won’t fix the problem include:
- A sole that is separating or loose after drying
- Deep cracks in the leather
- Heavy mold in the lining that returns
- Leather that stays soft and misshapen
A cobbler can often re-glue or resole boots, so it is worth asking before you discard a good pair.
Different boot types
- Full-grain leather boots: Generally recover well when dried correctly and conditioned.
- Suede and nubuck: They mark more easily. Let them dry naturally, then brush the nap up and treat with a suede-specific product. See is suede ruined once it gets wet?
- Waterproof-lined boots: The membrane keeps water out, but the leather outside can still get saturated. Dry and treat them as usual.
- Rubber boots: Water isn’t an issue, but dry the interior to prevent odor.
Preventing it next time
A water-repellent treatment helps boots shed rain. See how to waterproof leather boots for a comparison of wax, oil and spray. Rotating pairs on wet days gives each time to dry out properly. For walking boots caked with mud, see how to clean mud off leather walking boots.