Leather Boots

How to Waterproof Leather Boots: Wax, Oil or Spray?

Compare wax, oil and spray for waterproofing leather boots, with step-by-step application, tips for seams and suede, and how often to reapply.

On this page
  1. Short answer
  2. Water-resistant vs waterproof
  3. Wax, oil or spray compared
  4. Step by step with wax
  5. Oil or cream
  6. Spray
  7. Seams, welt and soles
  8. Suede and nubuck
  9. How often to reapply
  10. Mistakes to avoid

Short answer

For most smooth leather boots, a wax-based product gives the strongest water resistance, an oil or cream conditions the leather while adding a lighter level of protection, and a spray is the quick option, especially for suede and nubuck. You are making leather water-repellent rather than truly waterproof, so expect it to shed rain and splashes, not survive deep puddles.

Water-resistant vs waterproof

Leather is naturally somewhat water-resistant but absorbs water over time. Treatments make water bead and roll off and slow absorption, but they don’t turn a leather boot into a rubber boot. Fully waterproof boots usually combine a sealed construction or membrane with treated leather. Treat any home treatment as a way to improve protection, and keep your expectations realistic.

Wax, oil or spray compared

Wax or beeswax Oil or cream Spray
Water repellency Usually strongest for smooth leather Moderate Light to moderate
Effect on leather Can darken, may feel slightly tacky Softens and often darkens Usually minimal change
Durability Lasts longer, reapply when water stops beading Reapply regularly Wears off fastest
Best for Work and hiking boots in wet weather Dry, stiff boots that also need conditioning Suede, nubuck and quick top-ups
Watch out for Dress boots and light leather Over-softening and darkening Choose a product made for your leather type

Boots that see regular rain can combine approaches, for example conditioning with a cream and then adding wax. Don’t layer heavy products repeatedly. For shoes rather than boots, see how to waterproof leather shoes with sprays, waxes and creams.

Step by step with wax

  1. Clean the boots with a brush and a damp cloth and let them dry fully. Wax over dirt seals dirt in.
  2. Test a hidden spot. Wax can darken leather.
  3. Apply a thin layer with a cloth, brush or your fingers, working it into the seams and around the welt.
  4. Warm it in gently if the product directions allow, using a hair dryer on low or a warm room, so the wax soaks in. Keep the dryer moving and don’t overheat the leather.
  5. Wipe off the excess and buff with a brush or cloth.
  6. Let the boots rest overnight or as the label directs before wearing them in the wet.

Oil or cream

Oils and oil-based creams, such as mink oil, soak into leather to condition it and add some repellency. Apply a thin coat with a cloth, let it absorb, and wipe off the excess. Don’t overdo it. Too much oil can make leather limp and greasy, as covered in can you oil your boots too much? To compare two common oils, read mink oil vs neatsfoot oil.

Spray

Sprays are quick and generally don’t change the look much. Clean the boots, hold the can at the distance given on the label (often around 15 to 20 cm), apply an even coat and let it dry. Use a product that says it suits your leather type, and use it in a ventilated area. Sprays usually need reapplying more often than waxes.

Seams, welt and soles

Water gets in through stitching and gaps. Put extra attention on seams, the welt and the tongue gusset. Rubber and synthetic soles don’t need treatment, and leather soles generally should not be waxed in the same way as the upper.

Suede and nubuck

Skip wax and oils, which darken and flatten the nap. Use a spray made for suede or nubuck, apply it to clean, dry boots, and brush the nap back up afterward. See how to waterproof suede shoes and boots.

How often to reapply

There isn’t a fixed schedule. Check whether water still beads on the surface. If it soaks in and darkens the leather, it’s time to treat them again. For boots in frequent wet use, that might mean every month or two, and for occasional wear much less often. If boots have already been soaked, read are my boots ruined if they get wet? first and let them dry fully.

Mistakes to avoid

  • Treating dirty or wet boots
  • Applying heavy coats, which can leave leather greasy or sticky
  • Using strong heat to melt wax into the leather
  • Using products that aren’t made for your leather type
  • Treating boots with a waterproof membrane in ways the maker advises against

For a full cleaning routine to do before you waterproof, see how to clean and condition leather boots.

The complete guide to leather boots

How to Clean and Condition Leather Boots
Read the guide

Keep exploring

Guides from other topics

All topics →