Leather Boots

How to Clean Dr. Martens Boots

How to clean Dr. Martens boots: brush, wipe, clean the stitching and soles, then condition. Includes smooth leather vs suede and answers on washing machines and WD-40.

On this page
  1. Quick answer
  2. Check which leather you have
  3. Cleaning smooth leather Docs step by step
  4. Stitching and soles
  5. Conditioning and polish
  6. Suede, nubuck, patent and vegan pairs
  7. Can you wash Doc Martens in the washing machine?
  8. Does WD-40 restore leather? What about dish soap?
  9. Do podiatrists recommend Doc Martens?
  10. Keeping them clean

Quick answer

For standard smooth leather Dr. Martens, take out the laces, brush off loose dirt, wipe the boots with a damp cloth, and clean the stitching and soles with a soft brush. Let them air dry away from heat, then rub in a thin layer of conditioner or balm. Suede, nubuck, patent and synthetic pairs need different care.

Check which leather you have

Dr. Martens make boots in several materials, and the right cleaning method depends on which you own:

  • Smooth leather (the classic 1460 look): the method below applies.
  • Suede and nubuck: use a suede brush, an eraser and products made for suede. No wax or conditioner balm.
  • Patent and coated finishes: wipe with a damp cloth and use only products the maker recommends.
  • Vegan or synthetic: wipe clean with a damp cloth and a little mild soap, and skip wax balms.

The care label or the maker’s website will say which one you have. Dr. Martens also publish their own care guidance for each material, which is worth checking.

Cleaning smooth leather Docs step by step

  1. Unlace the boots. Clean the laces separately by hand. This lets you reach under the tongue and along the eyelets.
  2. Brush off dry dirt with a soft brush.
  3. Wipe the leather with a cloth that is damp, not wet.
  4. Tackle stubborn marks gently. A small amount of mild leather cleaner, or a drop of mild soap in lukewarm water, on a cloth or soft brush will do. Wipe off the residue with a clean damp cloth. Do not soak the leather, because water can leave it stiff.
  5. Air dry at room temperature. Shoe trees or loosely stuffed paper help them hold their shape. Never use a radiator or hair dryer.
  6. Condition and polish once dry (see below).

Stitching and soles

The yellow or white welt stitching shows dirt easily. A soft toothbrush with a little mild soapy water usually works, and a clean damp cloth wipes it off. Take care not to scrub so hard that you fuzz the thread.

For the sole, use a stiff brush and warm soapy water to clear mud from the tread and the welt, then wipe it down. Keep water off the leather upper as far as you can while you do it.

Conditioning and polish

Once the leather is fully dry, apply a thin, even layer of a leather conditioner or wax balm. Dr. Martens sell their own Wonder Balsam, and plenty of third-party conditioners are made for smooth leather. Let it absorb, wipe off the excess and buff. If you want extra shine or to cover scuffs on smooth leather, use a matching shoe polish. Our guide to removing scuff marks from leather shoes covers deeper marks.

Don’t overdo it. Too much product leaves leather greasy or overly soft, as explained in can you oil your boots too much? If you are comparing oils, see mink oil vs neatsfoot oil.

Suede, nubuck, patent and vegan pairs

  • Suede and nubuck: Brush the nap with a suede brush, use an eraser on marks, and use a suede protector spray if you like. Avoid wax and oils. Our nubuck cleaning guide has the full method.
  • Patent and coated: A damp cloth is usually enough. Use products made for that finish. See how to clean patent leather shoes.
  • Vegan and synthetic: Wipe clean, and don’t use wax balms.

Can you wash Doc Martens in the washing machine?

We would not. Leather can warp, stiffen or lose color, and heat and tumbling may weaken the adhesive or stitching in the sole. Hand cleaning takes a few minutes longer and is much safer.

Does WD-40 restore leather? What about dish soap?

  • WD-40: It is not designed for leather care. It can leave an oily residue and may dry the leather out over time, so we would not use it to “restore” boots. See what WD-40 does to leather shoes.
  • Dawn or other dish soap: Strong detergent can strip oils and finish. A tiny amount heavily diluted on a cloth is sometimes used on sturdy smooth leather, but a leather cleaner is the safer option. Condition afterward either way.

Do podiatrists recommend Doc Martens?

We can’t give medical advice, and opinions vary. Dr. Martens are known for a cushioned sole, but the stiff leather can be uncomfortable until the boots have softened, and fit matters more than brand. If you have foot pain or a medical condition, a podiatrist or physician can advise on footwear for you. Our guide to breaking in leather boots without blisters may help with stiff new pairs.

Keeping them clean

A quick brush after wearing and a wipe when they get dirty keeps most of the work away. If they get soaked, stuff them with paper and dry them slowly, as described in are my boots ruined if they get wet? For general principles that apply to any leather boot, see how to clean and condition leather boots.

The complete guide to leather boots

How to Clean and Condition Leather Boots
Read the guide

Keep exploring

Guides from other topics

All topics →