What patent leather is
Patent leather is leather (or sometimes a synthetic base) with a high-gloss coating. That coating is what makes it shiny and fairly water-resistant, and it is also what you are cleaning. Because the shine sits in the coating rather than in the leather itself, rough cloths, strong solvents and abrasive products can dull or damage it. Many “patent” shoes sold today are coated synthetics, so the same gentle approach applies.
Basic cleaning
- Wipe off dust with a soft, dry cloth. Grit can scratch the surface.
- Dampen a soft cloth with warm water and, if needed, a tiny amount of mild soap. Wring it out well.
- Wipe in gentle strokes. Do not scrub.
- Wipe again with a cloth dampened in plain water to remove soap residue.
- Buff dry with a clean, soft cloth. Air dry away from heat.
If the shoes are used outdoors in the UK or anywhere damp, wipe them after wearing so dirt and moisture don’t sit on the surface.
Removing scuffs
Not every scuff is the same. Some are marks left on the surface, such as rubber from another shoe or a dark streak. Others are scratches in the surface. (For scuffs on ordinary smooth leather, see how to remove scuff marks from leather shoes.)
- Surface marks: try a soft cloth with a little mild soap first, rubbing very lightly. A soft rubber-style eraser is sometimes used on stubborn rubber marks; test somewhere hidden first.
- Light haze or dullness: after cleaning, a soft cloth buff may bring back some shine.
- Stubborn marks: if gentle methods do not work, try a cleaner designed for patent leather, following its directions and testing first.
Be wary of strong solvents such as nail polish remover or rubbing alcohol. They can damage or cloud the coating, so I would avoid them on shoes you care about. If one has already marked a shoe, see how to repair acetone damage on leather.
Scratches
If a scratch has gone through the coating or you can feel it with a fingernail, it generally cannot be fully removed at home. You can sometimes make a fine scratch less noticeable by cleaning it and, in some cases, using a patent-leather-safe restorer or a very thin layer of a product made for the purpose. For deep damage, a cobbler may be able to advise on refinishing, though results vary.
Do WD-40, Vaseline or baby wipes work?
- WD-40: it is a solvent-based lubricant, and it may lift some marks but can leave an oily film and affect the finish. I would not recommend it. See what WD-40 does to leather shoes.
- Vaseline (petroleum jelly): sometimes suggested to restore shine. A very thin layer, buffed off thoroughly, may add some gloss, but it can attract dust and leave a greasy feel, so use sparingly if at all.
- Baby wipes: many contain moisturisers, fragrance or alcohol. A plain, alcohol-free wipe is fine for a quick wipe-down, but they can leave residue, so a damp cloth is a better routine choice.
Jordan 11 Concord patent leather
On sneakers such as the Air Jordan 11 “Concord”, the patent leather is usually the glossy panel (the mudguard) around the shoe, with fabric or mesh on the upper and a translucent sole.
- Clean the patent panel as above with a soft cloth.
- Use a soft brush and a mild soap solution on the fabric parts, avoiding soaking.
- Clean the sole with a soft brush and mild soap. Yellowing of translucent soles over time is an ageing effect that may not fully reverse with cleaning; see how to whiten yellowed soles.
- Avoid bleach and harsh chemicals on any part of the shoe.
- Let the pair dry naturally, not in the sun or on a heater.
Storage
Store patent leather shoes in a cool, dry place with shoe trees or paper inside, and keep them from rubbing against other shoes. Patent can transfer colour onto or from other materials, so avoid storing it pressed against dark or brightly coloured items. For general cleaning that applies across leather types, see how to clean leather shoes.