Short answer
To clean leather sneakers, remove the laces, brush off loose dirt, wipe the uppers with a soft cloth that is damp with water and a drop of mild soap, wipe again with plain water, clean the soles with a brush, and let the shoes air dry at room temperature. Condition the leather afterwards if it feels dry. Don’t use a washing machine.
Steps
- Take out the laces and insoles. Wash laces separately by hand in soapy water.
- Brush off dry dirt. Use a soft brush on the uppers, tongue and the seam where the upper meets the sole.
- Make a mild cleaning solution. A small amount of mild soap in warm water works for most smooth leather. A leather cleaner is another option.
- Wipe the uppers. Use a soft cloth or sponge that is damp, not wet. Wipe gently in circles, and test on a hidden spot first.
- Wipe again with plain water to remove soap.
- Dry slowly. Stuff the shoes with plain paper to help them keep their shape, and leave them at room temperature. Heat can stiffen or crack the leather.
- Condition if needed. Once dry, a light coat of leather conditioner can keep the leather from drying out. Skip it on suede or nubuck sneakers.
White leather sneakers
White leather shows scuffs and grime easily. The same damp-cloth method works, but a few notes (for a fuller routine, see how to clean white leather trainers):
- Work gently on marks and clean the whole panel evenly so you don’t leave a clean patch that stands out.
- Some people use baking soda mixed into a paste for whitening, mostly on rubber soles and midsoles. Because it is mildly abrasive, I would avoid it on the leather itself, and test first if you try it at all.
- Dish soap is sometimes used on white shoes. A very dilute amount may be fine on finished leather as an occasional clean. See is Dawn dish soap good for cleaning leather shoes.
- Avoid bleach, which can yellow leather and damage stitching and glue.
Soles and midsoles
Rubber soles and midsoles tolerate more scrubbing than the uppers. Use a brush and soapy water on them, taking care not to let dirty water run onto the leather. For soles that have turned yellow, see how to whiten yellowed soles on white leather sneakers. Some people use a melamine sponge (often sold as a “magic eraser”) on midsoles. It acts as a mild abrasive, so keep it off the leather and painted or printed areas.
Mistakes to avoid
- Washing machine or dryer use, which can warp the shoe and weaken the glue
- Soaking the shoes
- Using bleach, acetone or other harsh solvents; see what not to use on leather shoes
- Using WD-40 to “shine” them; see what WD-40 does to leather shoes
- Skipping the plain-water wipe, which can leave soap marks
Keeping them clean
A quick wipe after wearing prevents dirt from setting. A leather-safe protector can reduce staining, and rotating pairs lets each pair dry out between wears. For the general method that applies to dress shoes and boots as well, see how to clean leather shoes. If your sneakers have glossy patent panels, see how to clean patent leather shoes.